Posts Tagged ‘personal protection’
If you have already bought a TASER C2 you probably are aware how easy it is to use. You probably took the time to read the owner manual and watch the training DVD that comes with each TASER C2. By doing this you became familiar with the most effective way to use the TASER C2. If you have just purchased your TASER C2 make sure you take the time and go through the training DVD and owner manual as soon as it arrives.
The way the unit gets power is by using a Lithium battery cartridge. This cartridge is very well designed and contains enough energy to power the TASER C2 for 50 firings. Make sure before you put the battery cartridge in that you have not inserted the magazine cartridge first. You don’t want to do that. Always place the battery cartridge in first followed by inserting the magazine cartridge. When you have both cartridges in correctly you will see a green light. This signifies that your TASER C2 is ready for action.
Now we are ready to load the magazine cartridge. Very easy to do but with a few words of caution. Just like a gun, never point the business end of a TASER C2 at anyone unless you are going to use it. Second, also like a gun, make sure the safety is on. You do this by sliding the switch cover closed. After you obeyed those two things simply open up the magazine cover and install the cartridge. When you have pushed it in far enough you will hear an audible “click”. That is your notice that you have installed it correctly. A nice feature about the design of the personal protection product is that the magazine cannot be installed incorrectly. That is nice to know especially if you are in a high stress situation.
Actually using the TASER C2 is very easy. Hold it just like you would a gun. Make sure you hold it vertically and not sideways or some other fancy way. Push back the safety cover until the firing button is exposed and you are ready. All of the C2 models, except one, have a built in laser sighting device. This red light will show up on an attacker when you point the unit at them. Remember, the red light on the attacker shows you where the top probe will land. Aiming for the trunk area of the body is your best bet. Don’t forget also that the range of your personal protection device is 15 feet. You have to be closer then 15 feet to your attacker in order for the probes to reach him.
The optimum shot from the TASER C2 is from seven to ten feet away from the attacker to achieve maximum effect. If you shoot your attacker from about 7 feet away this will result in a probe spread of about 1 foot. Try to aim for the trunk of the body. Always try to have at least a 4-inch spread of the probes. At seven to ten feet away – the spread of the probes will be approximately 16 inches.
Just like with any tool, practice makes perfect. Before you actually need to use your device, practice with it. Become more familiar with it. There are targets available fto use that will help you gain confidence and proficiency. Don’t think you can practice on a person. The TASER C2 projects two barbs that can penetrate clothing and skin and that is what provides the wattage and voltage.
There is also a stun capability backup called the Drive Stun Back Up. This means that if you just happen to run out of cartridges and you still need to disable an attacker you can approach the person and use the stun gun functionality. The TASER C2 has two stun gun electrodes that will allow you to depress the volts into the attacker’s neck or other exposed body part and then make your escape.
After you have fired the TASER C2 and your attacker is on the ground, drop the unit and run. Run as fast as your little feet will take you. A great thing about the manufacturer of the unit, TASER International, is that they will replace your unit if you have had to use it during an attack. Simply send them a copy of the police report.
Looking to find the best deal on Self Defense Products, then visit www.YourGreatestProtection.com to find the best advice on TASER devices for you.